Exidor 404/405 Touch Bar 3 Point Panic Bolt with Vertical Latches

Exidor 404/405 Touch Bar 3 Point Panic Bolt with Vertical Latches

The Exidor 404 and 405 are surface mounted touch bar three point panic bolts for wooden or steel, single and double door applications, including fire doors.

The 404 is suitable for doors up to 900mm wide and the 405 for doors up to 1200mm wide. The three point locking offers increased security, whilst the patented lip prevents accidental jamming of the touch bar. Combining smooth stylish lines with the excellence of British engineering ensures they’re elegant enough for use in the most prestigious buildings with integrated interiors.

• Non-handed

• CE marked for safety

• Surface mounted

• Suitable for fire doors

• Three point locking for additional security

• Deadlocking latch bolt

• Two standard sizes – other sizes available on request

• Pullman latches giving a smoother latching action

• Silver Finish

• Other available finishes : white with green touch bar and black with green touch bar.

Maximum door width

The touch bar does not have to cover the full width of the door. To satisfy the requirements of EN 1125: 2008 the width of the touch bar’s actuator must cover at least 60% of the width of the inside face of the door leaf (as visible when the door is closed). (For more details please see below)

Minimum door width

This minimum door width is determined by adding the clearances required at each end to the overall length of the touch bar. (For more details please see below)

Sizes

All touch bars configurations are available in two standard lengths:

• 653.5mm overall which suits door widths between 692mm to a maximum of 900mm

• 833.5mm overall which suits door widths between 872mm to a maximum of 1200mm

They are identified by the model numbers (e.g. Model 404 is a Touch Bar Panic Bolt 653.5mm overall, model 405 is a Touch Bar Panic Bolt 833.5mm overall)

Click here for more information