Trimec ES8100 V-Lock

Brand: Trimec

All prices are inclusive of VAT.

Contact us if you have any questions about our products or availability.

Trimec ES8000 V-Lock

The unique and popular Trimec ES8000 V-Lock has been completely redesigned and engineered to produce the new ASSA ABLOY ES8100 V-Lock.

Key Features:

  • Unlocks under a Pre-Load of up to 100kg in 3-wire mode, 15kg in 2-wire mode 
  • Locks under a Pre-Load of 20kg (12W) and 35kg (24W)
  • 1000kg Holding Force
  • IP53 rated for external door applications
  • Door Position and Lock Status Monitoring
  • On-Board visual Lock Status indication and diagnostics LED
  • Easy, one-step, Fail Safe (PTL) and Fail Secure (PTO) field selection
  • May be mounted vertically or horizontally (must not be mounted in the floor)
  • Allows for door misalignment of up to 12mm total (+/-6mm)
  • Operating voltage: 11.4 - 26VDC
  • Durability tested to 500,000 cycles (120N unlocking, 50N locking)


  • Single and double swing hinge doors
  • Doors subject to side load (pre-load)
  • Misaligned doors
  • Glass doors
  • Suitable for use with access control, intercom, keypad and card reader systems and doors requiring door position monitoring


ES8000 V-Lock Technical Information:

  • Voltage: 12 to 24Vdc, Voltage Tolerance 12V (+15% - 0%) 24V(+/- 15%)
  • Current: Minimum 1 Amp Regulated Supply
  • Monitoring: COM, NO, NC Voltage free changeover contacts rated at 48 dc/100mA)
  • Security: Passed S3 (AS4145.2- 1993) 
  • Strength: Maximum 1000kg (with supported strike plate) 
  • Side Load: Side Load rated: Motorised Unlocking – 15kg max at bolt. Fail Safe Unlocking – 3kg max at bolt
  • Endurance: 300,000 operations
  • Environment: Operational temperature range -20°C to + 60°C
  • Lock Body: Stainless Steel Lock Body and Faceplate
  • Bolt: 11mm diameter, 20.5mm projection


Specification Statement:
The lock must be a high torque motorised bolt with Preload tolerance. The strike plate must be shaped in a V format to accommodate for misaligned doors. Lock will unlock with up to15kg of side pressure and will be powered with
12-24v and draw no more than 1000mA. The lock must be configurable for Power to Lock (Fail Safe) or Power to  Open (Fail Secure). The lock must be triggered with a magnet positioned in strike plate, and be monitored  for locked unlocked and door position.

Click here for the Trimec Data Sheet